Sign up for email reminders for Meetings, Swaps, Auctions, and Other Events.

Subscribe

Sign up for email reminders for Meetings, Swaps, Auctions, and Other Events.

DAPMH30 from jehmco

5 years 10 months ago #34346 by Kegger22
Replied by Kegger22 on topic DAPMH30 from jehmco
the one I have running is pretty quiet so I did a little test and found that the more air outlets I shut off while it was running the louder it became so you may have a bit too much back pressure on it and may need to increase the amount of air outlets or use 1 as a bleeder valve to help relieve the back pressure

Please Log in or Create an account to join the conversation.

More
5 years 11 months ago #34286 by sawboy
Replied by sawboy on topic DAPMH30 from jehmco
I had one until my recent upgrade. I put it on a piece of Poret foam. Quiet and powerful. Great bang for the buck!

Negative Karma for rule enforcement is a badge of honor :)

Please Log in or Create an account to join the conversation.

More
5 years 11 months ago #34284 by mikeg2929
Replied by mikeg2929 on topic DAPMH30 from jehmco
I am unfamiliar with that specific model - they all look like they changed since i last purchased one.

Senase is right - use some sort of material to dampen the vibration. I used a piece of old carpet.

Please Log in or Create an account to join the conversation.

More
5 years 11 months ago #34281 by Senase
Replied by Senase on topic DAPMH30 from jehmco
Initially when I set up this exact same pump for a friend, there was a noise issue . We then realized that it was placed on a surface that was causing the pump to resonate loudly. We then put a different material underneath it ( I think it was actually cardboard) and then it was fine. I would say first try placing different materials underneath it and secondly make sure it isn't vibrating and hitting any object around it. I hope one of these options can solve your problem. Good Luck!

The Newb

Please Log in or Create an account to join the conversation.

More
5 years 11 months ago #34279 by Jim_
DAPMH30 from jehmco was created by Jim_
I just bought DAPMH30 this pump and got it all set up it is so loud anyone have this pump?

Please Log in or Create an account to join the conversation.

More
Time to create page: 0.069 seconds